BareBlaster Ice Torch FAQ

Is the propane cylinder included?

No, the propane cylinder must be purchased separately. You can purchase a propane cylinder at your local hardware store.

Can I use BareBlaster Indoors?

NO!!! BareBlaster should only be used outdoors in a well ventilated area. It should be used aware from flammable materials.

Are there CAUTIONS I should be aware of when using BareBlaster?

Yes, The BareBlaster Ice Torch is to be used outdoors only in well ventilated areas. The BareBlaster Ice Torch produces very high temperatures and care should always be taken around flammable materials such as dry grass, leaves, etc. as they easily catch on fire and could pose a fire hazard. Always be aware of where the flame is directed; always keep the flame pointed down towards the ground. Never point the flame towards flammable materials, buildings or people. Carefully follow instructions on propane cylinder concerning use; do not store cylinders near fire or source of heat; do not puncture or incinerate empty cylinders. The nozzle of the BareBlaster Ice Torch remains hot even after use; do not touch the nozzle or put the nozzle down where it could come into contact with flammable materials. Carefully allow the nozzle to cool in a safe area.

Where can I use BareBlaster?

You can use BareBlaster on non-flammbale surfaces such as driveways or sidewalks where ice has accumulated. Care should always be taken around flammable materials such as dry grass, leaves, etc. as they easily catch on fire and could pose a fire hazard. Always be aware of where the flame is directed; always keep the flame pointed down towards the ground. Never point the flame towards flammable materials, buildings or people.

Does the BareBlaster come with a striker?

No, you must purchase a striker separately. They can be purchased at your local hardware store.

How should I store the BareBlaster Ice Torch?

Remove the propane cylinder when the BareBlaster Ice Torch is not in use. And keep away from children.

BareBlaster Ice Torch Instructions

Directions For Use:

The BareBlaster Ice Torch is designed to operate with most standard 14 to 26 disposable propane cylinders available at most hard or outdoor/camping stores.

Turn the gas regulating valve all the way clockwise so that it is closed. Screw the propane cylinder on the BareBlaster Ice Torch. A small amount of propane will escape while attaching the cylinder; the cylinder is properly seated on the BareBlaster when all hissing from the cylinder has stopped.

In case a tight connection cannot be made, use the extra "O" ring to make a proper connection.

Open the regulating valve slowly and ignite the BareBlaster Ice Torch at the nozzle.

Adjust the size of the flame by turning the regulating valve. To turn the flame off, turn the regulating valve until fully closed. The remaining propane in the BareBlaster will burn off in a few seconds and the flame will be extinguished.

Remove the propane cylinder when the BareBlaster Ice Torch is not in use.

If you have a question not covered in this FAQ, please contact us.